farm, what must be installed on each MetaFrame XP server?
A. Installer
B. Package
C. The Management Console for MetaFrame XP
D. Installation Manager Plug-in
Answer: A
2. Which three font sizes are supported with SpeedScreen latency reduction? (Choose
three).
A. 6 Points.
B. 16 Points.
C. 48 Points.
D. 52 Points.
Answer: A,B,C
3. A new server is added into the farm for redundancy. It is decided that this computer will
become the Backup Farm Metric Server and a TAPI server.
Where should the administrator look to turn this machine into a Backup Farm Metric
Server?
A. Server Properties of the new machine
B. Resource Manager Node
C. Farm Properties
D. Zone Properties
Answer: B
4. Which command can be used to obtain information from the local host cache concerning
the zone names and host IDs of the server farm.
A. HOSTHR.
B. QUERYHR
C. SHOWFARM
D. MFDISPLAY.
Answer: B
5. Which of the following is the default addressing mode MetaFrame XP servers in an
access center?
A. Normal
B. Alternate
C. Translated
D. Secure Gateway
Answer: A
6. When configuring the ICA Connection for Shadowing which of the following must be
used so that individual user configurations to take precedence over the ICA connection
settings for shadowing?
A. ICA Toolbar
B. User Manager
C. Inherit User Config
D. Citrix Shadow Taskbar
Answer: C
7. You have been given the task of creating a configuration file on your MetaFrame XP
server.By default, what is the name of the configuration file that is loaded by Program
Neighborhood Agent?
A. xpcfg.ica
B. config.xml
C. pnfile.xml
D. config.ica
Answer: B
8. Which command can be used to automatically configure the ICA Client reconnection
settings on a MetaFrame XP server or server farm?
A. acrcfg
B. icareset
C. reconnect ica
D. mfclient /reconnect
Answer: A
9. Which of the following items are required for joining an existing MetaFrame XP
Presentation server farm? (Choose two)
A. the name of the data store server
B. the name of the domain administrator
C. the IP address of the data store server
D. the logon credentials of a user authorized to access the data store
Answer: A,D
10. The Independent Management Architecture Service is required for which of the
following MetaFrame XP function? (Choose two).
A. Application enumeration.
B. Local host cache refresh.
C. Intra-zone communications.
D. Interoperability model load balancing.
Answer: B,C
11. What tool must be used in order to enable modem callback?
A. Citrix Dialup Manager
B. MetaFrame Connection Manager
C. Citrix Connection Configuration
D. the Management Console for MetaFrame XP
Answer: C
12. Which three versions of NDS are supported with MetaFrame XP Presentation Server,
Feature Release 3? (Choose three)
A. NetWare 3.1 or later
B. NetWare 4.11 or later
C. NetWare 6 or later
D. NetWare 5 with Support Pack 6
E. NetWare 5.1 with Support Pack 2
Answer: C, D, E
13. The standard grace period to activate a MetaFrame XP Presentation Service license is
_______.
A. Ten days
B. Two weeks
C. One month
D. 35 days
E. 45 days
Answer: D
14. In Load Manager, on which metric does the Default load evaluator base its result?
A. memory usage
B. CPU utilization
C. server user load
D. application user load
Answer: C
15. How can an existing wlsuprn. Txt file be manually imported into a MetaFrame XP farm
data store?
A. Run "qprinter / replica wlsuprn.lxt"
B. Run "Dsmant / imprmapping wtsuprn. Txt. \
C. Run "qrpinter / imprmapping wlsuprint.txt"
D. manually copy stsuprn. Txt to all of the MetaFrame XP servers in the farm.
Answer: C
16. Which of the following can be used to provide users with access to MetaFrame XP
Presentation Server applications through a standard Web browser?
A. Citrix Connection Configuration
B. Citrix Program Neighborhood Agent
C. the Web Interface for MetaFrame XP
D. the Management Console for MetaFrame XP
Answer: C
17. Which protocol does Citrix recommend when configuringthe ODBC driver for IBM
DB2?
A. IPX
B. RDP
C. XML
D. TCP/IP
Answer: D
18. What is the default location of the Nfuse.conf file in a standard installation of the Web
Interface for MetaFrame XP?
A.
B.
C.
D.
Answer: C
19. Jason has used the altaddr command to change the IP address setting for a MetaFrame
XP server. What else must be done for the new setting to take effect?
A. Restart the IMA Service
B. Restart the XML Service
C. Reboot the MetaFrame XP server
D. Update all Citrix Administrator accounts
Answer: A
20. On which operating system can MetaFrame XP Presentation server be installed? (Select
all that apply.)
A. Windows 2000 Professional
B. Windows 2003 Server
C. Windows 2003 Professional
D. Windows NT Server 4.0, Terminal Services Edition
Answer: B, D
21.The election process uses which protocol to determine the data collector?
A. ICA
B. UDP
C. TCP
D. SNMP
Answer: C
22. The Independent Management Architecture Service is required for which of the
following MetaFrame XP function? (Choose two).
A. Application enumeration.
B. Local host cache refresh.
C. Intra-zone communications.
D. Interoperability model load balancing.
Answer: B,C
23. The administrator needs to provide users with access to application sets. If the users are
using thin terminals, what method would allow them access?
A. Custom Connection
B. Publish Program Neighborhood
C. Publish Application Set Manager
D. Publish Program Neighborhood Agent
Answer: B
24. Which Novell client version is needed for MetaFrame XP to access NDS on Novell
services?
A. 3.1
B. 3.5
C. 4.8
D. 6.0
Answer: C
25. Connections with which network latency benefit least from SpeedScreen latency
reduction?
A. 0 -150 ms
B. 150 - 300 ms
C. 300 - 500 ms
D. 500 - 1000 ms
Answer: A
26.In regard to content redirection, what is the most likely cause for the error: "No file type
are available for this application" what is the most likely cause?
A. The registry on the server is corrupt.
B. The Citrix XML service is misconfigured.
C. The appropriate application is not installed.
D. The task "Update file types from the Registry" in the Management Console for
MetaFrame XP has not been performed.
Answer: C
27. What is the purpose of the local host cache?
A. Maintains a subset of the data store.
B. Maintains a copy of the data collector.
C. Maintains session information in the zone.
D. Maintains session information in the farm.
Answer: A
28. Which command can be used to install MetaFrame XP Presentation Server?
A. setupxp
B. Msiexec
C. Xpinstall
D. Mfinstall
Answer: B
29.To change the TCP/IP port used by the ICA protocol from 1494 to 1524, which
command can be used?
A. ICAPORT /port: 1524
B. ICAPORT /port 1494 1524
C. CHANGE ICAPORT /1524
D. CHANGE PORT / 1494: 1524
Answer: A
30. What displayed maximum load level indicates that the load balanced servers are
carrying a full load?
A. 1000
B. 9999
C. 10000
D. 99999
Answer: C
31. By default when printing to an auto created network printer from a MetaFrame XP
server, what will the MetaFrame XP server do?.
A. It will generate an error, Network printers cannot be auto createdl.
B. It will send the job to the client device outside the ICA data stream as a standard
TCP/IP print job for subsequent delivery to the network printer.
C. It will send the print job directly to the network printer as a TCP/IP print, job IF
unsuccessful, it will then send the job to the client device inside the ICA data stream
for subsequent delivery to the network printer.
D. It will send the print job directly to the network printer as a TCP/IP print job. If
unsuccessful, it will then send the job to the client device outside the ICA data stream
for subsequent delivery to the network printer.
Answer: C
32. By default, how many listener ports are created for each protocol?
A. 0
B. 1
C. 2
D. 5
E. 15
Answer: B
33. Dan must change the registry settings on the MetaFrame XP Presentation Server in
order to support the Netware Client. Which key he must be modified for this
implementation to work successfully?
A. HKEY-LOCAL-MACHINE/SOFTWARE/Citrix/Novell Client
B. HKEY-LOCAL-MACHINE/SOFTWARE/Novell/Citrix Client
C. HKEY-LOCAL-MACHINE/SOFTWARE/Microsoft/Keyring/Parameters
D. HKEY-LOCAL-MACHINE/SOFTWARE/Microsoft/Windows NT/Current
Version/Winlogon
Answer: D
34. You are a new administrator of a Citrix server farm. You have installed ten applications
for explicit user access. Users are complaining that one application does not work
correctly when choosing the CTRL-F2 sequence with the application. You should
instruct the users to .
A. update the ICA client and retest
B. edit the Hotkeys tab in the ICA client
C. run the application in a seamless window
D. change the MetaFrame XP server keyboard mapping file
Answer: B
35. Under which two circumstances would the BUILTIN Group option be used? (Choose
two)
A. For compatibility with Microsoft Script Debugger
B. For compatibility with Nowell's ZENworks product
C. If the network environment is configured with Windows workgroups.
D. If the network environment is configured with Windows network domains.
Answer: B,C
36. Which command allows and administrator to configure ICA connection settings that
determine graphics performance over the ICA display virtual channel?
A. SETCHAN
B. TWCONFIG
C. CHANGEVC
D. MFDISPLAY.
Answer: B
37. What tool is used to enable client printer connection at logon?
A. ICA Client Creator.
B. The Management Console for MetaFrame XP.
C. ICA Client Update Configuration.
D. Citrix Connection Configuration Manager.
Answer: D
38. How many users can connect to a server using the default load evaluator?
A. 10
B. 99
C. 100
D. 200
E. 1000
Answer: C
39. What display s all of the associations of Load Evaluators with servers and published
applications?
A. Farm node, Properties windows.
B. Load Evaluator node, Usage Report Tab.
C. Servers node, load Manager Monitor Tab.
D. Servers node, Load manager Servers dialog Box. \
Answer: B
40. What can be used to specify that an ICA connection use some settings from their user
accounts?
A. Inherit User Config
B. Inherit Client Config
C. Inherit Domain Config
D. Inherit Session Config
Answer: A
